|
1.
2"
PVC cap - 2"Rubber coupling (home depot) and i drilled/
2.
tapped
a hole in the cap and threded in a quick disconnect air fitting.
3.
But you could use a fitting for a tire pump also.
To test,
1.
Remove turbo to mas hose (pipe what ever)
2.
Install tester as shown below
3.
Block off MBC
4.
Pressurize system with compressor / air pump
5.
Use your boost gauge to make sure you dont go to hi
(20-30 psi)
6.
Listen for leaks and fix em'
Most common leaks are bov, silicone
fittings, throttle body elbow, and any punctures
|
